ARIZA 500 FTA galaxy at 97.0 w.

[ALEMAN]

Hi

I try to set up my fta new from package but is very different from my CWorks 600P.

Can someone give me a set up for Galaxy at 97.0w, lnb 10750 linear Ku Band.

Thanks a lot.

[Gary Gnu]

You need a 30" or larger dish.

Depending on what linear lnb you are using you may need to set lnb type to single or universal,lnb frequency 10750, Use transponder-11836 . If you have a switch in place, dont forget to assign the right port in settings.

once you have found the sat you might need to skew the lnb.......that is slightly turning the lnb about a (1/4) quarter turn,adjust and tighten properly.

[ALEMAN]

Thanks, i will change my dish for a larger one.
After that i will write what screen shows asking for your help because there are some lines wich i do not understand.

My CW600 makes a sound when quality is increasing (i flashed it) even if i use only for true FTA
Does ARIZA 500 makes a sound too if i flash it?

Thanks again!

[Gary Gnu]

The best thing thing to do is take the receiver and a small tv beside the dish with you and that way will be able to aim the dish quicker. Also if you are going to get a bigger dish, I would suggest getting a 36" with a motor. This will allow you to more easily search the sky..

This is the one I have and I really like it

/http://transatelectronics.com/store/stab-motorized-package_P235?zenid=b6b4d9ce16d9a9cc697074dd5bb88eb 1

[ALEMAN]

I will do it at night.
I will ask again tomorrow

Thanks.

[ALEMAN]

All is ok,

i set up my Ariza last night.

Thanks a lot. (Muchas Gracias)

[roger_full100]

please is there any help for me caint seems to get the hyperterminal to work for me still stuck on 8 please can some one help me please