Ports in IRD

[mali2can]

I currently jtagged two clones pansat 3000 and multistar...interestingly I gave them life via jtagged and both are showing ON on their display..but they are no further accepting bin files even factory files..I tried all the loaders..I guess I am missing any event or point..help will be appreciated..thanks in advance..

[mali2can]

wow...no body is replying..

[weenug]

my clone 2500 convert uses a straight cable and my bluejay2 uses a null cable

[tremaine]

yuo will have to use the jtag cable to load them

[fwank7]

Originally Posted by mali2can

I currently jtagged two clones pansat 3000 and multistar...interestingly I gave them life via jtagged and both are showing ON on their display..but they are no further accepting bin files even factory files..I tried all the loaders..I guess I am missing any event or point..help will be appreciated..thanks in advance..

What bins or flash did you load into them?
What bins beside factory bin are you trying to load via serial port?

[mali2can]

first I am trying to load the boat 75-m file to convert for pansat clones...and then JVVH files or something else. with straight cables(tried two or three straight cables may be they burnt) and all the loaders but no way..thats why its bugging me..even though i converted many fortecs before..thank you for your help..

[fwank7]

Ok so have you loaded the boot75 file to the opther reciever's that you have converted before or did you use another bin?

When loading the boot75 bin you do know that the reciever must be fully booted up to ON before you start the download correct?

Just double checking to make sure and if all else fails you may need to jtag a full Jtag conversion bin first then just maybe it will load up via serial port after that.

[mali2can]

Yes...it was working well until 233 bin released and then it stop accepting the bins...so I thought its not accepting the conversion back to 2500 so I reverse b75-1 and then start loading the new bins...so what I did I jtagged both the receiver and bring back to origional 2500..now as per your saying I am trying to load the full conversion bins via jtag...let s see what happen..but its good for playing on both old receiver...thank you Fwank for your prompt responses..

[fwank7]

When you say you went back to 2500 and reversed the b75 how did you go about going back to 2500?
Did you use chancysands converting back to 2500 by loading boot60 then 294t?
With converting back to 2500 the same steps need to be done when loading boot60 as loading boot75 and that is you need to let reciever fully boot up to ON before you start loading the boot60 bin.
Then leave reciver ON with ----- rolling across display screen then load 294t never turning OFF or rebooting the reciver manually.
Then to convert back to 2700 you need to reboot reciever manually after 294t is complete.
Then when reciever displays ON, then load b75 bin then the current bin.
Here is a little clear steps of converting back to 2500 then to 2700 just incase you need to do it again later on.
http://www.dssrookie.com/forums/b-fo...st-187988.html

Anyhow now that your in the process of loading conversion bin threw jtagging I think you should be ok and back to normal as long as you load the FULL JTAG conversion bin and not the serial bin.

Good Luck and let us know how you made out.

[mali2can]

thank you fwank7..you are the man...steps are crystal clear...I will give a shot..
when i was going back from converted FLU 2700 to 2500...I simply jtagged and erased the memory and later on used pansat 2500 bin to revive..It worked ...now I will use your above steps...Excellent...thank you once again..