dp 34 settings with third satt...?

[bj501]

have a dp setup already for 110/119. one rg6 goes to port 1 and one goes to port 2 both on the dp34 and on the stb (sonicview).

now hooked up new dp500 but using only one lnb for BAN. cant seem to lock it in and wonder if its because of the lnb and transponder settings.
wired the new dish into port 3 on the switch and chose port3 in the menu settings.

right now they are the same as on sat 110 (on the other dish), settings are 11250 and 12224. i am guessing since this is a different dish it must use diff lnb/transponder settings, but i am at a loss

if wiring and transpoder setting is fine, what is the missing ingredient to get it to work. right now strength is 58 and 0 quality.

...any help thanks
CHECK SITE RULES ESPECIALLY RULE #1.THIS WILL BE YOUR ONLY WARNING.

[ringman2223]

Originally Posted by bj501

have a dp setup already for 110/119. one rg6 goes to port 1 and one goes to port 2 both on the dp34 and on the stb (sonicview).

now hooked up new dp500 but using only one lnb for OFF LIMITS. cant seem to lock it in and wonder if its because of the lnb and transponder settings.
wired the new dish into port 3 on the switch and chose port3 in the menu settings.

right now they are the same as on sat 110 (on the other dish), settings are 11250 and 12224. i am guessing since this is a different dish it must use diff lnb/transponder settings, but i am at a loss

if wiring and transpoder setting is fine, what is the missing ingredient to get it to work. right now strength is 58 and 0 quality.

...any help thanks

Please edit your post. No discussion of that provider here.