Its that time of year. Check you switches!!

[dssbuckeye]

I picked up a cheita and still same problem.

For me to get one sat I need to bring 2 lines in, then I only get one signal at a time.

I need to hook up on sat, do a auto scan, hook up the other sat do an auto scan, then hook them both up to see if that worked.

I don't know what the problem is. I should just have to hook up one sat to lnb 1 and one to lnb 2 then just selet port 1 and 2. but it will should a good signal for only one of the satellites on all ports.

[dssbuckeye]

Well I don't know what I did. But it is working now.

I guess you just need to swear a bit throw things and yell at the reciever. I thinking the yelling is what fixed it.

[stealthwarrior]

good idea,right on gibson

[toughdog]

thanks for the info

[jimcraig86]

Speaking of switchs... in my tv room I have 1 coax cable coming out of the wall and I have a cable spliter from there to two receivers. The receivers are then connected to my stereo/tv and when one sat receiver goes down I can switch to the other right from my stereo tunner. Trouble is that not all the transponders get signal. I was told that a microwave multiplex switch would be the answer. My question is, were do i get one and then were do I put it in line, would I be able to just replace the cable splitter with the multiplex switch? Thanks for your help in advance.

[paramjit99]

k
i wil dod htis

[paramjit99]

owp srry fo this type