Need satellite arc

[whiskeyriver]

I have a 10 ft dish with a 4dtv receiver which hasn't been used for a while and has the old satellite stored in it. I am looking for a satellite arc showing the new sats and locations. Going to try putting them in myself. Any help would be appreciated.
Thanks

[xxtornxx]

satellite arc on skyvission.com for 4dtv and to set up unit if it is GI 920 (which i have) or 922 go to callnps.com and follow installation.It sounds like you have the beginings of a good set up might need another reciever to slave with 4dtv i have a pansat 9200hd and looking at azbox next.I use 920 to move and change polarity to sevo motor. And 4dtv is good for a sub.

[whiskeyriver]

Originally Posted by xxtornxx

satellite arc on skyvission.com for 4dtv and to set up unit if it is GI 920 (which i have) or 922 go to callnps.com and follow installation.It sounds like you have the beginings of a good set up might need another reciever to slave with 4dtv i have a pansat 9200hd and looking at azbox next.I use 920 to move and change polarity to sevo motor. And 4dtv is good for a sub.

Thanks for the info. I think I have it started now. also have a Pansat 2700, a Viewsat 9000, a viewsat 7000 and a Sonicview 8000. I have been reading some about the Azbox.
Again thanks.

[xxtornxx]

You have all the tools just put it together.I have a 7000 but slow blind scan