July 4 gift for the kids "Cartoon Network" and "N" channels

[cruzat]

Originally Posted by Nateunlimited

Thanks for replying bro. I really appreciate it alot. It still didn't work - but question - do I need dish 110 to do this? - because I only have one satalite which operates dish 119.

Yes 110 these channels are only on 110.

[Nateunlimited]

Originally Posted by cruzat

Yes 110 these channels are only on 110.

Bawhahaha! least I know I'm not crazy...ahh well..back to NASA...

[bob60]

Using a Pansat 3500s. I am pointing to 110w. LNB freq is 11250 .signal strength is 83 Quality is 78.

Video PID=6946
Audio PID=6847
Pcr Pid = 6946

Re-named each time=used cart, car1, N, etc .Moved them to the top, I have done a reset,factory reset,about a dozen times now, yelled at the wife,kicked the dog BUT STILL NOTHING!! What am i doing wrong? Would appreciate any idea's,help
Thanks

[cheeks]

Originally Posted by bob60

Using a Pansat 3500s. I am pointing to 110w. LNB freq is 11250 .signal strength is 83 Quality is 78.

Video PID=6946
Audio PID=6847
Pcr Pid = 6946

Re-named each time=used cart, car1, N, etc .Moved them to the top, I have done a reset,factory reset,about a dozen times now, yelled at the wife,kicked the dog BUT STILL NOTHING!! What am i doing wrong? Would appreciate any idea's,help
Thanks

With the 3500 try changing the PID on Echo 7 "119". read through the post you will see some 3500 user need to do this on echo 7.

look here post 15
July 4 gift for the kids "Cartoon Network" and "N" channels

[halfnut]

cheeks the audio is 6947 not 6847

[halfnut]

sorry meant bob60

[pele#1]

Is there any way to get GALAVISION? That's a Spanish channel on the 110 sat. It's used to be in the 200's.

[nsmickeyd]

Originally Posted by tonywu2002

Thanks for answering my question Modcal

i tried sat 110 and used the frequency you gave

however, the results are the same

i can get signals but no quality and it shows unlock for the down frequency 12486 (i've checked to use the right settings)

when i do the scan, it returns with 0 programs

by the way, i've always been using 119 and the LNB frequency 10750 to get channels before N3 came in (hope this info helps??)

thank you again for answering my reply and sorry for the bothering

Also you should check to make sure you have the correct LNB type setting on your dish setup screen. If its a single 18 inch dish you should have standard as the type selected. The wrong type selected can give unexpected results.

[ploti764]

Originally Posted by ploti764

Are those channels still working ?? I had gotten those channessl ( Toon & N ). Unfortunately I rescanned again, and I never got back those channels. Thanks for comment or reply.

Finally, after I did "factory reset", I get back those channels.

[columbiano]

thank you very much,i have both channels working,the kids love it,god bless.