3500 channel list

[cartoad2001]

After using 303 bin and rescanning i can only get about 1/2 the channels I use to get, (signal and quality seem Ok) so does any one have a channel list for the new bins??

[ftalooker]

304 is the latest bin and it should scan just fine.

Looker

[cartoad2001]

My error it,,,it was the 304 bin only getting half the channels

[hegel]

I have a 3500SD 304 doesn't seem to work for me...had to go back to 303, but get the "scrambled or bad channel" error every five minutes...and the comes back. anyone knows anything about this
thanks

[Dispatcher2117]

C/P thanks to swaffml;

You will need to download the new factory v06 bin, and the 304 Emu bin, once you have done that do the following.

1. Go to Antenna setup and write down your settings for your sats.
2. Put the two unzipped files on your SD card. (factory v06_api.bin, and X-05BL_081111_V304_api_nocard_F_Emu.bin)
3. Using the SD card, flash the receiver with the Factory v6 api.bin
4. When the receiver reboots, go to menu, pick Factory reset and press OK
5. Now go back to SD Memory and pick the v304 Emu. bin and load it.
6. Go to installation, antenna setup, and setup your sats using the info you wrote down in step 1.
7. Now do a new scan your sats, when it is done you should have TV if you do not just wait it can take a while
8. If you like you can edit the new scan with channel master to setup your favorites, but you can not use an old list, you can make a template of the old list and apply it to the new scan and that will work.

[cartoad2001]

thanks Dispatcher2117 it worked like a charm, the factory bin was the key,totally different format