FTA - DSSRookie Forum   VIP Membership get lots of benefits

Go Back   FTA - DSSRookie Forum >
FTA (Free-To-Air) CENTRE
> SONICVIEW Discussion


Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 03-14-2009, 09:43 PM
Junior Member
 

Join Date: Mar 2005
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Sick Sonicview 360, I broke it

Have a Sonicview 360 Premier. Tried to load a Chanel Master Converted BIN File on the USB, it downloaded like everything was OK but when it re booted no screen and front of STB reads menu then goes to 8.8.8.8.
Tried both ways noted below, USB and Serial loader) both will appear to load the ROM file to the box but neither will complete the write to the box after it has downloaded successfully the screen just continues to say writing to forever.
Also tried taking the cover off and unplugging the main board and turning the unit on from back power button for a count of 5 then turning off then plugging main board back in and turning unit back on from back button.

Any help or suggestions would be much appreciated.

For USB Port loading:
1. Load new fixed V0119P and new 360 Premier SAT FILE 06-02-08.sat SAT File onto USB device
2.Press & Hold front panel OK button, at the same time switch read switch ON, Loading Menu will display.
3. Select new sat file and load
4. After load new sat file, select latest fixed and load
5. Reboot, setup and rescan

For Serial Port loading:

1. Turn OFF the Premier OFF completely
2. Connecting the Premier and PC with Null modem cable
3. Press & Hold front panel OK button, at the same time switch read switch ON, Loading Menu will display.
4. Open Loader 1.1
5. Click Connect to choose Com Port
6. Choose new 360 Premier SAT FILE 06-02-08.sat SAT File and let it update
7. After sat file update is done, repeat step 4-6 but, this time choose SV360 Premier_V0119P to update
8. When all update are done, do a power recycle (reboot)
9. Do setup and sat scan.
Reply With Quote
  #2 (permalink)  
Old 03-14-2009, 11:45 PM
Gary Gnu's Avatar
NO GNEWS IS GOOD GNEWS !!
 

Join Date: Aug 2008
Posts: 13,002
Thanks: 1,413
Thanked 4,347 Times in 2,784 Posts
Try loading the factory file.
__________________
ALL information contained in my posts is collected and attainable from many sites on the internet, and is for Educational Purposes Only . In no way does it condone illegally unscrambling of any satellite signals.All situations are hypothetical. Please check the laws in the country you live in before use of any information given.

Please Dont Forget The Thanks Button If Someone Helped You.
Reply With Quote
  #3 (permalink)  
Old 03-15-2009, 01:36 AM
Junior Member
 

Join Date: Mar 2005
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Gary,
I finally got it to take an XL version of a channel list, I then loaded the factory 105 bin The XL file didn’t have a complete listing of LNB types but then the 119 bin made the Installation menu look normal. I thought I may have a created a door stop for a while but we’re up and running good as new.

Thanks
Reply With Quote
  #4 (permalink)  
Old 03-15-2009, 01:41 AM
Gary Gnu's Avatar
NO GNEWS IS GOOD GNEWS !!
 

Join Date: Aug 2008
Posts: 13,002
Thanks: 1,413
Thanked 4,347 Times in 2,784 Posts
Thats good to hear...Enjoy
__________________
ALL information contained in my posts is collected and attainable from many sites on the internet, and is for Educational Purposes Only . In no way does it condone illegally unscrambling of any satellite signals.All situations are hypothetical. Please check the laws in the country you live in before use of any information given.

Please Dont Forget The Thanks Button If Someone Helped You.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sick Sir Elton is out of hospital NEWSpaperBOT Entertainment 0 11-06-2009 09:20 AM
uh-oh I broke my toy. keywestaxi VIEWSAT Discussion 1 11-21-2008 11:21 AM
Broke Down coathanger CAPTIVEWORKS Disc 2 07-10-2008 07:40 PM


All times are GMT -4. The time now is 05:08 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
DSSrookie FTA Forums