Ihub via Power Adapter to 2701HG-B(2WIRE) Router/Modem(Ihub won,t Work!)

[LUV2CLIMB]

Hi Guy's are anybodys have the any Experience or problem that been already Been solved?.Here's my problem i did everything follow the Instructions etc...
but still coudn't connect to internet and all the lights are up the ihub and ethernet cables the lights on.


1.2701HG-B(2WIRE)ROUTER/MODEM

2.One power adapter are connected to modem/router via ethernet cable and plug in to the outlet.

3.other power adapter are connected to the Ihub from the outlet to SV8000HD.

4.Unzipped the new Beta/file to my usb drive and follow instructions and no GO.


I would appreciate if some one could give me some help.Thanks in Advance...

[whiskeyriver]

I went into the router settings and turned the firewall off. Check your ip settings and s/n.

[JimMrBass]

Make sure your modem and router are in sync with one another.

[hbhulabhai]

c&p
Just thought id make this a bit cleaner mods. It seems that at least a couple of people have gotten running off of this so i thought id give it a better title and clean it up some.

Ok, basically i spent about 20 hours trying to get my ihub running but nothing I seemed to do could get it to work. I believe what I did wrong was press apply before putting in the serial number and I think this made my life very difficult. Here is what I finally did to get it going. Please keep in mind that some of these steps may not be required but I would hate to dismiss anything at this point.

1. go in to your ihub settings and zero absolutely everything even put a 0 in place of svftaiks.com and press apply

1. turn off your reciever and unplug ihub from the back

1. turn off your router and let it sit for at least 30 seconds to a minute

1. turn on your router

1. turn on your reciever (do not plug in ihub)

1. plug in ihub (the reciever should pick it up then reboot after about 30 seconds)

1. go into settings set to static then go down and put your local port on 80 Set it back to DHCP. Set "use DNS" to yes and put in svftaiks.com in the DNS IP space (I used all lower case letters). Put your server port on 1920. Enter your serial #. Press apply and do a hard boot

1. Now when my SV8000 came back on it said "network adapter connected". Yours may or may not do this. Go in to "USER OPTIONS" and put it on IHUB for "used Priority"

1. If all went well you should have *** in a couple of minutes or you can try chan 301 on Charlie to see if it comes on briefly. If it does you are in business and you can set your Used Priority to both. That should be it

[LUV2CLIMB]

Thanks guy's for all your response and help, been doing this for a while but this something new and different kinda project to learn ,I'm not really a geek computer guy,so thanks guy and see what happens if i could get it to work...

[pitayo1]

Are u using a power adapter in a power surge? Cause they dont work in a power surge.

[mexibob17]

Originally Posted by JimMrBass

Make sure your modem and router are in sync with one another.

The 2wire modem is a four port router also. Qwest uses the 2wire modem along with a few other ISPs.

hiip://en.wikipedia.org/wiki/2Wire

[LUV2CLIMB]

pitayo01, nope it's plug in directly to wall outlet, I know it's working cause my xbox360 is hook up thru there,thanks,though

[LUV2CLIMB]

well guy's hopefully mission accomplish,I did put in to Channel 301 302 are working so far but I didn't go thru all the rest of the channels that supposed to be working on Ihub.
How could i tell if my ihub is working?is working now or halfway there?.

[olympusom]

if its showing as connected and your'e gettin channels thats a pretty good indicator