Help finding 125W

[cjeffh1]

I am trying to find PBS on KU band. I have entered lyngsat info and still cant find it. I get 123 and 129 but cant locate this one?

[yuyu2324]

yes i got 125 w in Detroit but some channel don't have audio next 123 w do blind scane and you will get it look xxx.dishpoint for position in your city

[iggy57]

Originally Posted by cjeffh1

I am trying to find PBS on KU band. I have entered lyngsat info and still cant find it. I get 123 and 129 but cant locate this one?

Need more info on your dish and receiver setup. EG What are you using for a Receiver dish, and LNB or LNBs ?? The more info you give the easier it is to try and help you.

[cjeffh1]

I have a viewsat ultra, 36" fortec, invacom, h380 motor, I get 123W just fine and 129W but cant seem to find 125W. I have manually entered the tp's and channels from lyngsat.

[iggy57]

Originally Posted by cjeffh1

I have a viewsat ultra, 36" fortec, invacom, h380 motor, I get 123W just fine and 129W but cant seem to find 125W. I have manually entered the tp's and channels from lyngsat.

You don,t mention what tp you are using maybe try this >>


V-12103 1353 3/4 04.340 0033 0038 MONTANA PBS

Or

V-12179 1429 3/4 30.000 0193 ac-3 0196 PBS CREATE

[yoyo38]

if your using a motor just use usals and create a new sat called 125 w and the motor will go to 125 w. the audio is ac3 5.1 so you will need a surround sound or home theater system to get the audio.

[cjeffh1]

Some times I have noticed with my viewsat ultra when using diseq motor control east and west controls get reversed. Later I will notice it is ok but I could not find 125 because when I was on 123 and hit west it went east. Maybe this will help some one else out there.