Finding 119...

[bawana]

I've got one dish on 110, been trying for ages to get a lock on 119 with the other. Not sure if I need a larger reflector, the lnb and dish are DN products and it works on any other sat. Can get every other sat except this one. I live on an elevation with a clear view of the south west horizon.

All of my settings are correct (been over it a dozen times), but never get a blip on it.

I'm in the toronto area, anyone else having the same issue?

[yngdoccanada]

Need alittle more info. You say you have one dish on 110 and can't get a lock with the other. Are you using 2 dishes or one 18 inch dish with two lnbs? For TO 119 is not far from 110.

[bawana]

Been testing by switching the straight through cable from one to the other dish. Did this to ensure there was enough signal strength before connecting with the splitter.

[nowhere_man35]

Are you using a SAT Finder? Often what will happen is when you're looking for 119 the Transponder (TP Freq) setting on the setup screen will be set to a 110 Transponder (usually 12224). If you switch that to 12239 (a 119 transponder) you might have a little more luck. I've been frustrated with this problem before as well.

[bawana]

Will try that, sounds like the problem.

[shadiah]

For 119 don't forget to change your TP freq to 12239 for the meters to work.