Viewsat Ultra & multiple sat scans

[limomanohio]

Ok i have a viewsat ultra hooked up to a dish 1000 with 3 lnb's and i want to hit 119,110,and 129 birds.I set my skew @125 el@30 and az@233 and i live in the 43223 zip code.I scanned the 119 bird and 129 showed up @ the top.I scanned 110 with settings settings tp 12224 lnb freq 11250 w/ 68% Quality motor off lnb type ocsdp and got 119 channels.Any ideas on what i need to do to get all three birds and maybe what i'm doing wrong?Thanks for the help.I have both lines going to a multi-switch that is going to 2 different receivers.

[firebuster106]

119 port 1, 110 port 2, 129 port 3. is yours like this? is it a 1000.2 dish?

[VaqueroEsq]

Scanned 119W and 129W shows up at the top as the detected sat?
Is this what shows up in Antenna Setup for 119W? You do need the detected sat (on the blue banner) to be the same as the selected sat.

Your 119W LNB may be pointed at 129W, and your 110W LNB may be pointed at 119W, which leaves the 129W LNB pointing somewhere at 139W (no sat there). Its a common mistake. Move your dish eastwards about 10 degrees (about the width of 1 LNB).