hunting sat 110

[RBRAN1]

this might be a dumb question but where did sat 110 go ? it use
to be echo 8.6, i see now it looks like 10.11. when i scan i can't get but 15 channels. any advise ? thanks

[clearview]

It's in the same position as always...just renamed to 10,11.Your dish possibly could have moved slightly or some of your settings could have changed.I would check the settings first.

[RBRAN1]

thanks clearview, i though that was right, but i can't get but 15 channels. i checked my settings seem to be ok. when i changed tp i got a better signal but it changed echo 5 up at the top of the screen. i also disconnected my 119 cable to help try to get a better signal but no luck. any suggestions?

[shadiah]

If it said e*5 at the top, you aren't pionted at the right sat.

[RBRAN1]

i guess i need to go out a move my dish a little and see if it will help my signal. right now signal is 63 and my tp is set on 12239. no quality

[copperhead1971]

the best tp for 110 is 12224 and the best for 119 is tp 12239,that is for lineing up your sats

[copperhead1971]

also make sure dish arm is level/plumb and try this place pick your dish kind and pick your area you live and it will give you elevation dish skew if needed and general pointing direction
/http://satcalculator.freehostia.com/

[RBRAN1]

what is the best sat to align 1st , 110 or 119 ? i though when you align 119 if would bring in 110 also ?

[copperhead1971]

for some yes i useally get 110 in frist my self ,,are you useing a y-yoke dish like a dish 500?

[RBRAN1]

i'm using a dishpro 500 dish. thats the only one i have ever used.